Date   : Sat, 25 Apr 1998 19:46:09 +0100
From   : Stuart William McConnachie <stuart@...>
Subject: Re: RGB Cable to Microvitec Monitor

In message <000c01bd542b$bb962c70$c34c03c3@...>, Mark Usher
>>In the meantime, I've been using the composite video output (in black
>>and white) but if memory serves, there was a simple way to get colour
>>out of this connector - can anyone remember how this is done?
>
>
>On Issue 1, 2 & 3 boards a 470 PicoFarad capacitor should be fitted between
>the emitter of Q9 (identified by an "e" next to one leg) and the base of Q7
>(the central leg).
>
>On Issue 4 and later, the capacitor is on board and can be connected simply
>by fitting link 39 which may be found next to the modulator in the far right
>hand corner of the PCB.
>
>On the BBC Model B+ link S26 should be made.

And LK11 on the Master (Issue 2 board, but was probably on the Issue 1
too).


-- 
Stuart McConnachie (stuart@...              )
43 The Hollows, Long Eaton, Nottingham, NG10 2ES, UK
Mobile: 0966 224307